BEPowerEquipment 4,000 PSI - 4.0 GPM Hot Water Pressure Washer with Honda GX390 Engine and Belt Driven General Triplex Pump - HW4013HBG

Engineered for Longevity. Powered by Heat. Built for the Toughest Jobs.

When industrial-grade cleaning demands maximum durability, high heat, and relentless power, the BE Power Equipment HW4013HBG delivers without compromise. Featuring a belt-driven General triplex pump, a Honda GX390 engine with electric start, and a 12V diesel-fired Beckett burner, this unit is designed for professionals who expect the most from their equipment—every single day.

With 4,000 PSI at 4.0 GPM, a high-efficiency burner, and extended service life thanks to its belt drive system, this hot water pressure washer is your go-to solution for heavy-duty degreasing, equipment cleaning, and site sanitation in demanding commercial, agricultural, or industrial environments.

Why Hot Water? Because Cold Isn’t Always Enough.

Some messes need more than high pressure—they need heat. The HW4013HBG harnesses the cleaning power of hot water up to 200°F (93°C) using a 330,000 BTU Beckett burner to cut through grease, oil, and grime that cold water simply can’t handle.

The diesel-fired burner is powered by a reliable 12V ignition system and controlled via an adjustable thermostat and rocker switch, giving you total flexibility to clean with hot or cold water, depending on the job.

Belt Drive Advantage: Built to Go the Distance

Unlike direct drive units, the belt drive system in the HW4013HBG dramatically reduces pump RPM, vibration, and heat—key contributors to wear and tear. By lowering operating stress on the pump, the belt drive increases the service life of critical components, making it ideal for extended daily use in commercial applications.

This configuration not only provides quieter performance but also improved pump longevity, making it the preferred choice for professional cleaning crews, equipment operators, and mobile service businesses that rely on their washer day in and day out.

Legendary Honda GX390 Power with Electric Start

At the heart of this unit is the Honda GX390 389cc engine, an industry staple for good reason. Known for its bulletproof durability, smooth performance, and fuel efficiency, the GX390 starts easily and runs reliably under heavy load. With electric start functionality and a 55AH marine-grade AGM battery, you get dependable ignition in any condition—no pull cords, no downtime.

Honda's OHV design, precision camshaft, and cast iron sleeve construction ensure maximum engine life with minimal maintenance. It’s a workhorse—pure and simple.

General Triplex Pump: Industrial Strength from the Inside Out

The commercial-grade General triplex pump is a vital part of this unit’s high-performance package. Built for daily duty, it delivers reliable, high-pressure flow with exceptional internal design:

• Die-cast body for rugged structural integrity

• Forged brass manifold for corrosion resistance

• One-piece plungers for reduced seal wear and smoother operation

• Thermal release valve to prevent overheating

• Enhanced heat dissipation for continuous hot water use

Paired with an external unloader, the pump runs cooler and with less strain, ensuring peak performance and longer operational life even in high-demand environments.

Heavy-Duty Steel Frame with Mobile Jobsite Design

All of this power is protected by a powder-coated steel frame with a roll cage design. It’s built to take a beating—whether in a mobile wash rig, a shop, or a construction site—while still offering easy access for maintenance and control panel adjustments.

Four 13-inch flat-free tires provide smooth mobility over gravel, dirt, or concrete. For truck or trailer mounting, the unit includes integrated frame brackets—just remove the wheels and bolt it in. And when you need to lift it onto a flatbed or elevated platform, the built-in lift point makes crane handling simple and secure.

Smart Features That Save Time and Extend Lifespan

The HW4013HBG is packed with practical upgrades that make servicing and winterization easier, faster, and cleaner:

• 12" oil drain hoses simplify oil changes by allowing you to drain fluids cleanly from the pump and engine—no crawling or mess required.

• An included brass air fitting allows you to connect an air compressor to the water inlet, letting you blow out residual water from the coil. This reduces scale buildup, prevents freezing in cold climates, and extends the life of your heating coil.

These smart additions help protect your investment and keep your equipment in service longer—saving you time, money, and downtime in the long run.

Commercial Accessories Included

Everything you need to start cleaning is included out of the box:

• 50-foot high-pressure hose: Double-braided steel wire for maximum durability and heat resistance

• 36” insulated spray gun and wand assembly: Ergonomic grip and heat-protected for comfortable use

• 5 quick-connect nozzles: Easily switch between 0°, 15°, 25°, 40°, and soap for versatile cleaning performance

• Quick-connect fittings: Ensure fast setup and nozzle swaps between jobs

From degreasing shop floors to washing down machinery, you’ll have the reach, flow, and control you need to work efficiently.

The Ideal Machine for Demanding Work

The HW4013HBG is purpose-built for industries where performance matters:

• Construction and heavy equipment washing

• Fleet maintenance and mobile wash services

• Agricultural and livestock sanitation

• Municipal services and public works

• Industrial plant and facility maintenance

• Oil field and mining operations

Wherever there's grease, mud, grime, or bacteria—this pressure washer is ready.

Product Specifications

• Pressure: 4,000 PSI

• Flow Rate: 4.0 GPM

• Engine: Honda GX390 389cc with electric start

• Battery: 55AH marine AGM included

• Pump: General triplex – die-cast body, forged brass manifold, one-piece plungers

• Drive Type: Belt drive

• Unloader: External

• Burner: Diesel-fired 12V Beckett

• BTU Output: 330,000

• Temperature Control: Adjustable thermostat up to 200°F / 93°C

• Hose: 50-ft double-braided steel, quick-connect

• Spray Wand: 36” insulated with 5 QC nozzles

• Frame: Powder-coated steel roll cage

• Tires: Four 13” flat-free

• Oil Drain Hoses: 12” extensions for clean oil changes

• Air Purge Fitting: Brass air inlet to blow out coil

• Lift Point: Integrated in frame

• Mounting Brackets: Included for permanent installs

• Weight: 580 lbs

• Dimensions (LxWxH): 45" x 33" x 52"

• Units per Pallet: 1

The actual product may vary slightly from the images shown on the website due to continuous product improvements and testing. All BE Power Equipment pressure washers are factory tested and may show slight traces of oil or fuel.

A Professional’s Pressure Washer, From Engine to Nozzle

With its belt-driven General pump, commercial-grade Honda engine, and 330,000 BTU burner system, the HW4013HBG is the premium choice for hot water pressure washing in high-demand environments. Built for power, built for longevity—and built to help you work smarter.